Screw press dewatering machine application and working principle
The main function of screw press dewatering machine is to juice fruits and vegetables. Widely used in fruit and vegetable juice, coconut milk and other products processing. For example, apple, pear, mulberry, aloe vera, cactus, grape, orange, orange and other fruits and vegetables crushing and juicing.
Screw press dewatering machine contact parts is high quality stainless steel materials, in line with the requirements of food hygiene. The screw juicing equipment can be combined with the crusher, which can not only meet the using requirements, but also reduce the cost.
It is composed of the front bracket, hopper, screw, strainer, juicer, rear bracket and slag discharge tank. The left end of the spiral spindle is supported on the rolling bearing seat and the right end is supported on the handwheel bearing seat. The motor works by a pair of triangular belt drive screws.
The main parts of the screw juicing machine are spiral shaped. The bottom diameter of screw increases gradually along the direction of slag outlet, and the pitch decreases gradually. When the material is pushed forward by the spiral, the extrusion of the material is formed due to the reduction of the volume of the spiral cavity, squeezing the juice.
The above is about the relevant introduction of the screw juicing machine, if you know about the relevant introduction of the equipment, welcome to contact us!
Screw press dewatering machine contact parts is high quality stainless steel materials, in line with the requirements of food hygiene. The screw juicing equipment can be combined with the crusher, which can not only meet the using requirements, but also reduce the cost.
It is composed of the front bracket, hopper, screw, strainer, juicer, rear bracket and slag discharge tank. The left end of the spiral spindle is supported on the rolling bearing seat and the right end is supported on the handwheel bearing seat. The motor works by a pair of triangular belt drive screws.
The main parts of the screw juicing machine are spiral shaped. The bottom diameter of screw increases gradually along the direction of slag outlet, and the pitch decreases gradually. When the material is pushed forward by the spiral, the extrusion of the material is formed due to the reduction of the volume of the spiral cavity, squeezing the juice.
The above is about the relevant introduction of the screw juicing machine, if you know about the relevant introduction of the equipment, welcome to contact us!
RECENT POSTS
Application
-
Trim Waste/Prepared Vegetable DehydrationReduces water content from 80–90% to 60–70% for trim waste, and from 95% to 80–85% for prepared vegetables post-washing.READ MORE > -
Pineapples juicingRipe pineapples have a sweet taste and are one of the popular fruits. Pineapples deep processing is an effective way to increase earnings. Xinxiang Zhongtianxing Xinghuo Machinery Factory screw press dehydrator is involved in the processing of pineapple meat, pineapple rhizome, pineapple leaves and rotten pineapple.READ MORE >
More Application
.jpg)
